SME Series M2-12R Tonearm
Reference Only, Can Not Be Purchased Separately.
What HFL Thinks
SME Series M2-12R Tonearm – It goes without saying that the pick-up arm on your turntable is a critical part to any vinyl replay system, it does such an important job and being able to set up your arm correctly is critical to getting the maximum sound quality from the grooves of your vinyl. SME are described as makers of the best pick-up arms in the world for very good reason, these are not just tone-arms but precision pieces of engineering allowing you to set up your arm and cartridge to get the best sound possible. Offering a wide range of alternatives there is something for everyone so please come in to HFL to experience an SME arm for yourself.
The The Model M2-12R precision pick-up arm is an extension of our popular Series M2 range offering optimum cartridge choice with minimal tracking error and harmonic distortion associated with a 12 inch arm.
Providing classic looks and meticulous build quality, This arm offers all the most important features, traditional ‘J’ shaped tone-arm, detachable S2-R aluminium headshell with azimuth adjustment, two stage tungsten counterbalance system, superb quality ball race bearings and a level of rigidity to suit all types of cartridge
The The Model M2-12R precision pick-up arm is an extension of our popular Series M2 range offering optimum cartridge choice with minimal tracking error and harmonic distortion associated with a 12 inch arm.
Providing classic looks and meticulous build quality, This arm offers all the most important features, traditional ‘J’ shaped tone-arm, detachable S2-R aluminium headshell with azimuth adjustment, two stage tungsten counterbalance system, superb quality ball race bearings and a level of rigidity to suit all types of cartridge
Features:
- The 12in construction with thin walled stainless steel tone-arm takes advantage of the reduction in maximum tracking error/distortion afforded by the greater arm length when compared with 9in models.
- S2-R Aluminum shell detachable and interchangeable without disturbing cartridge or wiring.
- Double draw-in pin bayonet fitting design ensures a rigid junction with the tone-arm.
- Unique headshell to tone-arm coupling readily allows cartridge azimuth adjustment.
- Internal constrained layer damps minute residual vibrations making tone-arm acoustically inert.
- Stainless steel cross shaft, ground and thread ground. Carried in a substantial yoke on 10mm precision ball races.
- Stainless steel vertical shaft, ground and thread ground, with integral 16mm diameter flange to couple shaft and yoke.
- 23mm diameter steel pillar, heat treated, ground and honed, carries two 17mm precision ball races, widely spaced to resist tilt.
- Anti-skate control operates through Anti-Skate weight and filament, adjustable up to 5g VTF.
- Lowering/raising control gives smooth positive action. Height of lift can be adjusted.
- Thumbwheel (Vertical tracking angle VTA) height adjustment.
- Bedplate affords +/- 12.0mm movement to facilitate (Horizontal tracking angle HTA) adjustment.
- Base slides on bedplate for horizontal tracking adjustment with double null-point protractor.
- Tungsten-alloy balance weight inserts allow maximum centre of gravity shift to balance a greater range of cartridges up to 38g in S2-R headshell and direct plug-in heads up to 46g.
- Precise vertical tracking force up to 5g applied in 0,5g increments via rider weight and graduated wayrod.
- Fluid damper FD-M2 is available as an optional extra.
- Alignment protractor designed to provide HTA settings with the greatest accuracy.
- Internal wiring in LCOFC.
- Balanced Hybrid Cable 1.2M audio lead with gold plated phono plugs.
Specification:
- Effective Mass: 18.0g
- Vertical Tracking Force VTF: up to 5.0g
- Maximum Tracking Error: 0.01degrees/mm
- Null Points Inner Radius: 66.04mm
- Null Points Outer Radius: 120.90mm
- Weight, Net: 834.0g
- Audio Lead: 1.2m Balanced Hybrid Cable with Gold Plated Connectors
Reviews
There are no reviews yet.